What should you pay attention to before buying a swing pipe rain test box?

Outdoor electrical appliances must be able to withstand rainy environments. To ensure reliable waterproof performance, product enclosures are generally required to meet IPX3 to IPX4 rainproof standards. During product development, many companies rely on the swing pipe rain test box to simulate rainfall conditions and test product durability.

However, due to limited familiarity with the swing pipe rain test box, many companies may face difficulties during installation and use. To help you avoid common pitfalls, this article provides important precautions and practical guidance for proper usage.

1. Water and Power Configuration

• Water Supply: The swing pipe rain test box uses a 1/2-inch (four-point) water inlet. A 6-meter-long hose is typically provided with the unit, so be sure to prepare a matching 1/2-inch water source connector.

• Power Supply: The device operates on 220V voltage. Ensure the test area has stable power and proper grounding to prevent electrical faults and ensure safety.

2. Installation Environment Requirements

• Floor Load Capacity: The device should be installed in a room with a flat surface that can bear at least 200 kg/m².

• Environmental Conditions: The room must have good ventilation, and be free from strong vibrations, electromagnetic interference, and hazardous substances such as flammable, explosive, corrosive chemicals, and dust.

3. Space Requirements

To ensure smooth operation and easy maintenance, please reserve sufficient space around the swing pipe rain test box:

• Back side: At least 800mm away from the wall

• Top clearance: 600–800mm from the ceiling

• Front, left, and right sides: 1000mm of space recommended

4. Usage Precautions

• Water Quality Management:

  • Based on test frequency, replace the water at least once a week.

  • If the water filter turns black, replace the filter element immediately to maintain water quality.

• Proper Operation:

  • After each test, always click the “Swing Pipe Zero” function to return the pipe to its original position, preventing unnecessary wear.

  • Before starting any test, inspect the spray nozzles. If they are clogged or deformed, replace them promptly to ensure test accuracy.

5. Conclusion

A well-prepared installation site and correct operating procedures are key to the efficient use of the swing pipe rain test box. By following the precautions above, companies can ensure smoother testing processes and more accurate waterproof performance evaluations.

Guangzhou Yuexin Testing Equipment Co., Ltd. specializes in the R&D and manufacturing of rain test boxes, including swing pipe rain test systems. We look forward to connecting with you and supporting your testing needs.

This article is an original work by Guangzhou Yuexin Testing Equipment Co., Ltd. Unauthorized reproduction is prohibited.