The IPX34 rain test chamber simulates rain weather in nature to test the product shell for rain and splash resistance.
After purchasing the IPX34 rain test chamber, some companies are not familiar with the equipment or have personnel deployment problems, which causes the new person in charge to make wrong operations during use, resulting in damage to the equipment. Here, Yue Xin Xiaobian will explain to you how to debug the IPX34 rain test chamber before use.
The specific debugging steps of the IPX34 rain test chamber are as follows:
1. Check whether the water source and power supply of the waterproof test machine have been connected.
2. Turn on the power of the IPX34 rain test chamber to enter the operation interface and manually start the water addition mode.
3. Manually start the swing pipe forward, swing pipe reverse, turntable forward, turntable reverse, and confirm that the operation is normal.
4. Manually open the ipx3/4 solenoid valve, check the needle spraying situation, and replace the needle in time if it is blocked or deformed.
5. While opening the ipx3/4 solenoid valve, adjust the increase and decrease of the water flow meter.
Through the above debugging of the IPX34 rain test chamber, ensure that all links and components can operate normally without abnormalities before the test, and then start the waterproof test.
Yuexin focuses on the research and development and production of IPX34 rain test chambers, and looks forward to every communication with you.
This article is an original article of Guangzhou Yuexin Testing Equipment Co., Ltd. and may not be reproduced without permission.
Your message must be between 20-3,000 characters!
