As a commonly used waterproof grade test equipment, the rain test device is mainly used to test the waterproof performance of the shell of outdoor lamps, electronic products, household appliances, auto parts, industrial electromechanical and other products. According to the industry, its test grade is IPX3/4.
During the test, a semicircular spiral tube is mainly used for swinging rain. According to the different models, common equipment is divided into two types, open and box type. Among them, the open rain device can be divided into wall-fixed and movable models. Each model has its unique advantages.
This article mainly talks about the design process of the rain test device. Here, we mainly share the more common open movable swing pipe rain model as an example.
The production of the rain test device includes the following links: product function positioning-drawing design-raw material selection-raw material processing-structure welding-hardware assembly-software program input-function debugging-factory aging test, etc. Other details are not written together.
From the production process point of view, the quality of a rain test device is first determined by product design. Design is very critical. From the appearance size to the position of a screw hole, it may have a significant impact on the machine itself. Manufacturers with mature technology have experience not only in the skilled control of details in the manufacturing process, but also in the design level.
For example: both ends of the ordinary rain test device are completely horizontal, but because the rain test device is cross-sprayed during the test, water will definitely splash onto the chassis body. At this time, there will be a situation where if the water flows from the top along the chassis to the control end, it may have a destructive effect on the control structure. Therefore, unlike ordinary designs, experienced manufacturers will design the columns on both sides to be slightly tilted inward, which can completely and effectively prevent water from flowing down to the control end. This design is difficult to see from the appearance, and it can only be seen clearly with a spirit level.
Although it is only a small improvement in details, it can greatly avoid damage to the machine. If the machine control is damaged due to erosion, not to mention the hardware cost, if the user is far away from the manufacturer, the time cost and labor cost are sometimes quite large.
In addition to this small detail, there are many other places, but most of them involve the core advantages of the manufacturer, which are not listed here one by one. You can continue to communicate with us for specific content.
Yuexin-focuses on the research and development and production of rain test equipment, and looks forward to every communication with you.
This article is an original article of Guangzhou Yuexin Testing Equipment Co., Ltd. and may not be reproduced without permission.
Your message must be between 20-3,000 characters!
